Date Published:May. 10. 2016 Date Updated:Oct. 07. 2024
Property of Special Material Screws
Property of Special Material Screws
Mechanical property
| Property |
Inconel＊1equiv (NCF600) SNSI |
Pure molybdenum SNSM SNFCM |
Hastelloy＊2C-276 equiv (NW0276) SNSH-C276 |
Hastelloy＊2C-22 equiv (NW6022) SNSH-C22 |
Monel 400 equiv (UNS N0400) SNSMN |
Nickel (NW2201) SNSN |
Super Invar SNSIV |
Phosphor bronze (C5191) SNSP |
Aluminum Alloy (A5056) SNSA |
Tantalum SNSTA |
MAT21＊3 （UNS N06210） SNSMT |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tensile strength (N/mm2) |
548 - 695 | 515 | 690 or Higher | 690 or Higher | 517 - 620 | 343 - 411 | 470 | 590 or Higher | 294 | 271 | 690 |
| 0.2% durability (N/mm2) |
205 - 352 | 380 | 283 or Higher | 310 or Higher | 172 - 345 | 68 - 166 | 333 | － | 245 | 189 | 310 |
| Extension (%) | 35 - 55 | 15 | 40 or Higher | 45 or Higher | 35 - 60 | 40 - 60 | 43 | 8 | 12 | 51.2 | 45 |
| Hardness |
65 - 85(HRB) | － | － | － | 60 - 80(HRB) | 75 - 100(HB) | 143(HV) | － | 98(HB) | － |
－ |
Values in chart are for reference only. They are not guaranteed values.
Physical property
| Property | Inconel＊1equiv (NCF600) SNSI |
Pure molybdenum SNSM SNFCM |
Hastelloy＊2C-276 equiv (NW0276) SNSH-C276 |
Hastelloy＊2C-22 equiv (NW6022) SNSH-C22 |
Monel 400 equiv (UNS N0400) SNSMN |
Nickel (NW2201) SNSN |
Super Invar SNSIV |
|---|---|---|---|---|---|---|---|
| Specific gravity |
8.42 | 10.2 | 8.89 | 8.69 | 8.80 | 8.89 | 8.15 |
| Longitudinal elastic modulus (GPa) |
207 | 327 | 205 | 206 | 179 | 206 | 132 |
| Heat thermal conductivity (W/(m・K) |
16.7 | 142 | － | － | 22 | 79.5 | 10.47 |
| Linear expansion coefficient (K-1) |
13.4×10-6 | 5.1×10-6 | 11.2×10-6 | 12.4×10-6 | 14.2×10-6(100℃) | 13.4×10-6 | 0.69×10-6 |
| Electric resistivity (μΩ・m) |
1.0 | 0.058 | 1.23 | 1.14 | 0.5 | 0.085 | 0.77 |
| Property | Phosphor bronze (C5191) SNSP |
Aluminum Alloy (A5056) SNSA |
Tantalum SNSTA |
MAT21＊3 （UNS N06210） SNSMT |
Tungsten SNCW |
|---|---|---|---|---|---|
| Specific gravity |
8.83 | 2.64 | 16.65 | 8.76 | 19.3 |
| Longitudinal elastic modulus (GPa) |
105 | 71.7 | 185 | 205 | － |
| Heat thermal conductivity (W/(m・K) |
67 | 112 | － | － | 174 |
| Linear expansion coefficient (K-1) |
18×10-6 | 24.1×10-6 | 6.4×10-6 | 12.0×10-6 | 4.36×10-6 |
| Electric resistivity (μΩ・m) |
0.13 | 0.064 | － | 1.274 | 0.054 |
Values in chart are for reference only. They are not guaranteed values.
Chemical resistance of Inconel＊1, Hastelloy＊2 and nickel screws
| Chemical name |
Temperature |
Inconel＊1 | Hastelloy＊2 | Nickel |
|---|---|---|---|---|
| Dilute sulfuric acid |
Room temperature |
A | AA | A |
| Boiling point |
D | A | D | |
| Concentrated sulfuric acid |
Room temperature |
C | AA | C |
| Boiling point |
D | D | D | |
| Dilute hydrochloric acid |
Room temperature |
B | AA | A |
| Boiling point |
D | D | D | |
| Concentrated hydrochloric acid |
Room temperature |
D | AA | D |
| Boiling point |
D | B | D | |
| Dilute nitric acid |
Room temperature |
D | AA | D |
| Boiling point |
－ | AA | D | |
| Concentrated nitric acid |
Room temperature |
A | AA | D |
| Boiling point |
－ | D | D | |
| Dilute phosphoric acid |
Room temperature |
AA | AA | AA |
| Boiling point |
－ | AA | D | |
| Concentrated phosphoric acid |
Room temperature |
AA | AA | AA |
| Boiling point |
－ | B | D | |
| Sodium hydroxide(weak) | Room temperature |
AA | － | AA |
| Boiling point |
C | － | AA | |
| Sodium hydroxide(concentrated) | Room temperature |
AA | － | AA |
| Boiling point |
C | － | AA |
- AA ：Highly Excellent
- A ：Very Good
- B ：Satisfactory
- C ：Limit
- D ：Not satisfactory
Chemical resistance of MAT21＊3
| Chemical Name | Composition (%) | Temperature | MAT21＊3 (UNS N06210) |
|
|---|---|---|---|---|
| HCI | 1 | Boiling Point |
◎ |
|
| 2 | Boiling Point |
◎ |
||
| 4 | Boiling Point |
△ |
||
| 5 | Boiling Point |
△ |
||
| H2SO4 |
10 | Boiling Point |
◎ |
|
| 40 | Boiling Point |
△ |
||
| Mixed Fluids |
H2SO4 |
10 | Boiling Point |
△ |
| HCI |
2 | |||
| Mixed Fluids |
H2SO4 |
20 | 80°C |
◎ |
| HCI |
1.5 | |||
| Mixed Fluids |
H2SO4 |
50 | 50°C |
○ |
| HCI |
1.5 | |||
| HNO3 |
10 | Boiling Point |
◎ |
|
| H3PO4 |
85 | Boiling Point |
○ |
|
| Method B |
※ |
Boiling Point |
○ |
|
※ 23.0% sulfuric acid + 1.2% hydrochloric acid + 1% iron (III) chloride + 1% copper (II) chloride
- ◎：＜0.127 mm/year
- ○：0.127 - 0.508 mm/year
- △：0.508 - 1.27 mm/year
- ×：＞1.27 mm/year
＊1：Inconel is a registered trademark of Special Metals Corporation.
＊2：Hastelloy is a registered trademark of Haynes.
＊3：MAT and MAT21 are registered trademarks of Proterial, Ltd.
- A test piece was used to acquire the test data.
- Chemical resistance changes with performance conditions.
Always carry out tests under performance conditions similar to actual conditions in advance.
Magnetic flux density of phosphor bronze screw
| Phosphor bronze |
SUSXM7(Equivalent to SUS304) | |
|---|---|---|
| Magnetic flux density(Ｔ) |
0 | 5×10-5 |
Measurement device : F.W.BELL 5080 type gauss (tesla) meter
Measurement condition : DC magnetic field measurement mode Distance between probe and sample 5 mm
The Properties of Ceramic Screws
Physical Properties of Ceramic Screws
Al2O3
| Physical Properties | Al2O3(99.5% Alumina) |
|---|---|
| Specific Gravity | 3.9 - 3.939 |
| Flexural Strength(N/mm2) | 360 |
| Volume Resistivity(Ω・m) | ＞1012 |
| Thermal Conductivity(W/(m・K)) | 32(20℃) |
| Linear Expansion Coefficient(K-1) | 7.2×10-6(40 - 400℃) |
| Vickers Hardness(GPa) | 15.5 |
| Maximum Duty Temperature(℃)(GPa) | 1500 |
SiC
| Physical Properties | SiC |
|---|---|
| Specific Gravity (g/cm3) | 3.12 |
| Volume Resistivity (Ω・m) | 0.2~1.8×10-1 |
| Thermal Conductivity (W/(m・k)) | 153 |
| Linear Expansion Coefficient (K-1) | 4.3×10-6 |
| Vickers Hardness (GPa) | 22(21.7) |
| Water Absorption Rate | less than 0.1 |
| Young's Modulus (GPa) | 402 |
| 3-point Bending Test (MPa) | 470 |
- Values in chart are for reference only. They are not guaranteed values.
Chemical Resistance of Ceramic Screws
Al2O3
| Chemical Name | Temperature | Hour | Effect |
|---|---|---|---|
| 35% Hydrochloric Acid | Boiling | 30 minutes | ◎ |
| 70% Nitric Acid | Boiling | 30 minutes | ◎ |
| 98% Sulfuric Acid | Boiling | 30 minutes | ◎ |
| 90% Phosphoric Acid | Boiling | 30 minutes | 〇 |
| 60% Hydrofluoric Acid | 20℃ | 24 hours | △ |
| 10% Potassium Hydroxide | 80℃ | 7 Days | ◎ |
| Potassium Hydroxide | 500℃(Boiling) | 24 hours | △ |
| Sodium Hydroxide | 500℃(Boiling) | 24 hours | 〇 |
| Sodium Carbonate | 900℃(Boiling) | 24 hours | 〇 |
| Sodium Sulfate | 1000℃(Boiling) | 24 hours | ◎ |
| Potassium Fluoride | 90℃(Boiling) | 4 hours | × |
- ◎：No Corrosion
- 〇：Slight Corrosion
- △：Moderate Corrosion
- ×：Heavy Corrosion
SiC
| Chemical Name | Temperature | Effect |
|---|---|---|
| Ammonia (28.0-30.0%) | Room Temperature | ◎ |
| Hydrogen peroxide solution (30.0-35.5%) |
Room Temperature | ◎ |
| Hydrofluoric Acid (49.5-50.5%) | Room Temperature | ◎ |
| 50% sulfuric acid | Room Temperature | ◎ |
- ◎：No Corrosion
- 〇：Slight Corrosion
- △：Moderate Corrosion
- ×：Heavy Corrosion
- When tightening ceramic screws, use a torque driver or torque wrench and do not exceed the torsional torque.The recommended torque is 50% of the torsional torque.
M Torsional Torque (N・m) M3 0.04 M4 0.05 M5 0.10 M6 0.15 M8 0.30 M10 0.50 - Values in chart are for reference only. They are not guaranteed values.
- Heat resistance and chemical resistance change with performance conditions. Always carry out tests under performance conditions similar to actual conditions in advance.
- Ceramic screws may be damaged by impact. Take care when handling these screws.
- Also, ceramics screws with special specifications such as ventilation holes, dimensions, shapes, and cleanroom washing are available. Please contact us for details.
Engineering Tips HINTS for NEW IDEAS
Examples to help you resolve any issues you may have.
Technical Data
Others
Machine Tools
Semiconductor Manufacturing Equipment
Food Machinery
Automotive Manufacturing Process
Medical Equipment
FA Devices
Technical Data
Special Screws